| 3,362 | 144 | 335 |
| 下载次数 | 被引频次 | 阅读次数 |
并联机床是20世纪90年代发展起来的新型机床,它是集机床技术、机器人技术和现代数控技术于一身的新一代加工设备,与传统数控机床相比,并联机床有刚度重量比大、响应速度快、环境适应性强和技术附加值高等优点,具有广阔的应用前景.笔者主要介绍了并联机床的起源、发展以及优越性,分析了并联机床的国内外发展现状以及应用领域和发展趋势.
Abstract：The parallel machine tool(PMT),a new kind of machine tool developed in 1990's,is a new generation machining equipment combined with the technology of machine tools,robots and modern NC.Compared with traditional machine tools,PMT has such specific properties as high stiffness weight ratio,high response rate,high adaptability to circumstance and high additional technology value,etc.Therefore,it has a very vast application field in industry.The history of PMT is reviewed and its development and advantage are also presented.The research status of PMT all over the world and their application field and future development current are analyzed.
[1]雷源忠.现代制造科学的新发展[J].中国机械工程,1999,10(9):962-965.
[2]汪劲松,黄田.并联机床——机床行业面临的机遇与挑战[J].中国机械工程,1999,10(10):1103-1107.
[3]Merlet J P.Determination of 6D Workspaces of Gough-Type Parallel Manipulator and Comparison between Different Geometries[J].The International Journal of Robotics Research,1999,18(9):902-916.
[4]汪劲松,段广洪,杨向东.VAMT1Y虚拟轴机床[J].制造技术与机床,1998(2):42-43.
[5]黄田,孔令夫,方跃法.并联机器人机构学理论及控制[M].北京:机械工业出版社,1997.
[6]张曙.并联机床理论与应用[M].北京:机械工业出版社,2001.
[7]陈学生,陈在礼,孔民秀.并联机器人研究的进展与现状[J].机器人,2002,24(5):464-470.
[8]邬昌峰,高荣慧.并联机床的特点、研究现状及展望[J].机械,2003,30(1):1-6.
[9]关浩.21世纪新兴机床—虚拟轴并联机床[J].江苏机械制造与自动化,2001,4:17-18.
[10]Gosselin C M J.Dyn.Sys.Meas.Control[J].Trans.Of the ASME,1996,118(4):22-28.
[11]段广洪,李铁民.并联机器的起源和发展[J].世界制造技术与装备市场,2006(1):41-48.
[12]Stewart D.A Platform with Six Degree of Freedom[J].Proceeding of the Institute for Mechanical Engineering,1965,108(15):371-386.
[13]Cai G Q,Hu M,Guo C,et al.Development and.study of a new kind of tripod[J].Annals of CIRP,1999(1):333-336.
[14]冯宝富,蔡光起.水平滑块式三杆并联钢锭修磨机器人[J].福州大学学报(自然科学版),2005,33(5):619-623.
[15]Hunt K H.Structural kinematics of in-parallel-actuated robot arm[J].Journal of Mechanism,Transmission,and Automation in De-sign,1983,105(2):15-22.
[16]孟祥志.一种新型立卧转换式三杆混联机床的设计研究[D].沈阳:东北大学,2004.
[17]Lin Wei,Cran C D.Closed-form forward displacement analysis of the 4-5 in-parallel platform.of Mech[J].Des,1994,116(1):47-53.
[18]中国机床工具工业协会赴EM097工作组.六条腿机床取得重大进展[J].世界制造技术与装备市场,1998(2):17-22.
[19]石宏.3-TPS混联机床相关控制算法研究[D].沈阳:东北大学,2005.
[20]Kim J,Park F C,Lee J M.A New Parallel Mechanism Machine Tool Capable of Five-Face Machining[J].Annals of the CIRP,1999,48(1):337-340.
[21]Cai G Q,Wang Q M.Hu M,A study on the kinematics and dynamics of a 3-DOF parallel machine tool[J].Journal of Material ofProcessing Technology,2001,111:269-272.
[22]Matthias Hebsacker,孙季初.用六条腿实现高速铣削[J].制造技术与机床,1998(10):20-22.
[23]杨建新,郁鼎文,王立平,等.并联机床研究现状与展望[J].机械设计与制造工程,2002(3):10-14.
[24]陈文家,王洪光,房立金,等.并联机床的发展现状与展望[J].机电工程,2001,18(4):5-9.
[25]Qinchuan Li,David,Zhen Huang.Type Synthesis of 3R2T 5-DOF Parallel Mechanisms Using the Lie Group of Displacements[J].IEEE Transactions on Robotics&Automation,2004,20(2):173-180.
[26]蔡光起,胡明.机器人化的三腿磨削机床的研究[J].制造技术与机床,1998(10):4-6.
[27]杨斌久,蔡光起,赵亮.三杆五自由度并联机床运动学研究[J].工具技术,2005,39(2):14-16.
[28]孟祥志,蔡光起,赵亮.三杆混联数控机床的动力学[J].机械工程学报,2006,42(6):112-119.
[29]李长河,孟广耀,蔡光起.高速超高速磨粒加工技术的现状与新进展[J].青岛理工大学学报,2007,28(2):6-13.
[30]杨斌久,蔡光起,罗继曼.少自由度并联机器人的研究现状[J].机床与液压,2006(5):202-205.
[31]王晋生,蔡光起,胡明.并联机床发展现状和共性关键技术[J].2006(12):33-35.
[32]王优强,王丙生,王民轩,等.油井管杆磨蚀试验研究[J].青岛理工大学学报,2005,26(5):1-4.
基本信息:
中图分类号:TG666
引用信息:
[1]李长河,蔡光起.并联机床发展与国内外研究现状[J].青岛理工大学学报,2008,No.100(01):7-13+67.
基金信息:
国家自然科学基金资助项目(50575038);; 教育部科学技术研究重大项目(104190)
2008-02-15
2008-02-15